The Safety Centre - Home Page


Providers of Fall Protection Systems

 
About Uniline Safety Systems

Uniline Safety Systems Ltd is an established manufacturer of engineered Safety Systems which are designed to protect individuals against the implications of a fall from height.

Uniline's systems can be fitted to a wide range of modern roof systems including:
  • Standing Seam
  • Built Up
  • Composite
  • Single Ply Membrane
  • Modern Bitumen
  • Green
Working closely with leading manufacturers Uniline has gained a thorough understanding of structural tolerances, weather proofing and conformity with environmental and safety legislation. This knowledge has enabled the company to develop several unique ways to secure anchorage to roof surfaces with minimal or no actual penetration of the roof sheet. Uniline's unique 'sized to fit' range of force management anchors are designed to dissipate impact loads created during falls through re-orientation and energy absorption, effectively distributing loads to within tolerable roof sheet/structural limits. Typical installations utilise Uni8™ or Uniline™ horizontal lifeline components.
Uni-8™ Stainless Steel Cable System is designed, tested and manufactured to integrate with a variety of anchor posts, specialist fixings and sub components. When assembled the system enables users to gain access to exposed work areas without hindrance or restriction. The worker can disconnect or connect at any point designated safe to do so.

12m spans between structural fixings, supporting multiple users in restraint or fall arrest means that Uni 8 affords high level security at realistic cost.


Uni-8™ Stainless Steel Cable System
Uniline™ Synthetic Cable System Uniline™ Synthetic Cable System is a unique 16mm polyester parallel fibre cable which, when combined with specified stainless steel sub components, enables unhindered and continuous movement around or across a building or structure. Unrivalled system performance characteristics permit span distances of up to 50m, whilst minimising structural loading and line deflection in the event of a fall.
The Uniline range of Force Management Anchors have been designed and developed to compliment the Uniline and Uni-8 systems for 'top fix' integration on built-up, composite panel, standing seam, single-ply membrane, bitumous and green roofs. Uniline's patented design ensures tolerable load distribution to the roof structure through the use of built-in energy absorbers and the re-orientation of the load generated by a fall arrest system to a more beneficial plain.


Back to top
Uniline Force Management Anchor
Uniline Safety Systems

Meridian House, Stanney Mill Road, Little Stanney, Chester, CH2 4HX
Tel: 0151 356 1953 Fax: 0151 355 3833 E-mail: safety@mpsurvey.co.uk


M & P Survey Equipment Ltd. Reg. in England No. 1975721 Reg. Office: 56 Hamilton Street, Birkenhead CH41 5HZ
Holtwood Marketing Ltd. Reg in England No. 1903709 Reg. Office 56 Hamilton Street, Birkenhead CH41 5HZ